What are the safety standards for amusement equipment?
The latest safety standards for amusement equipment safety standard Security measures In the passenger section of the air operations, the overall structure should be solid and reliable, and important parts and components should adopt insurance measures. The number of steel ropes or chains used for hanging passengers must not be less than two. In connection with the seat part, it must be considered that a balance can be maintained when disconnected. Doors that close the cockpit more than 1m above the ground must be equipped with two locking devices or a locking device with insurance that cannot be opened inside. Barriers to the entrance and exit of unclosed cockpits should also have locking devices with insurance. During operation, when the power supply suddenly loses power or the equipment fails, which endangers the safety of people, it must be equipped with an automatic or manual emergency stop device. In the event of a failure in the operation of amusement facilities, there should be measures to ease passengers. 2. Passenger restraint device When running, the passenger may be placed in the object to be moved, hit or will be thrown out, slide out, must be equipped with passenger restraint device. For the more dangerous, if necessary, consider setting up two sets of independent restraint devices. Seat belts, safety levers, levers, etc. can be used. Tethering device: It should be reliable and comfortable, and the parts that are directly in contact with people have appropriate softness. The design of the restraint device should prevent pinching or crushing of a part of a person's body. It should be easy to adjust and operate. Seat belt: It can be used alone for facilities that are slightly swaying or have slower speeds and are not flipped out. The seat belts are generally equipped with auxiliary handles. For sports facilities, seat belts can be used as an auxiliary restraint device. Safety Clamp: When operating, it may lead to danger of passengers being thrown out, a corresponding type of safety pressure bar must be set; the safety pressure bar itself must have sufficient strength and locking force to ensure that tourists are not thrown or dropped , and is always locked until the device stops operating. 3. Safety requirements for security fences and platforms Safety fences should be set in and exported separately, and guide fences should be installed at the entrance. Platforms should have anti-skid measures. The opening direction of the security fence door should be the same as that of the passenger (except in special cases). To prevent injury to the hands of the person when the door is closed, the gap between the door frame and the column should be appropriate, or take other protective measures. While running and riding people's rides, the passengers' entrance and exit should not exceed 300 mm of the platform. The height of the entrances and exits of other amusement facilities that ride on people’s part should be convenient. 4. Other safety requirements A prominent safety sign should be set up at the necessary places and locations. Safety signs are divided into four types: prohibition mark (red), warning mark (yellow), instruction mark (blue), and warning mark (green). Exposed sharp edges, sharp corners, burrs, and dangerous protrusions are not allowed where passengers can touch. Through the culverts, the containment surfaces should be made of materials that are not easy to fall off, and the ornaments should be fixed firmly. The amusement equipment produced by our company's sports equipment complies with international safety standards, and there are no quality problems at the factory. Order phone number Fake Eyelashes,Magnetic Lashes,Magnetic Eyelashes,Mink Lashes Hangzhou Shibode Technology Co., Ltd. , https://www.inblooming88.com
