Features and principles of constant temperature water tank

Features and principles of constant temperature water tank

Features and principles of constant temperature water tank

Principle of constant temperature water tank: heating water through electric heating tube, using advanced microcomputer temperature controller to accurately control the temperature, at the same time, in order to improve the unevenness of water temperature, add a circulation pump to force water circulation, and achieve the purpose of consistent temperature through continuous circulation . Improving the water temperature environment can achieve higher experimental requirements.

Features of constant temperature sink: The inner tank is made of high-quality stainless steel, and the outer shell is made of cold plate electrostatic spray, which has a long service life. It can be used to establish a second constant temperature field, and the temperature is uniform, the water temperature fluctuation is small, there is basically no overshoot, and it is convenient to use.

The constant temperature water tank uses 220V AC power, please make sure that the rated current of the power socket is not less than 10A before use, and it has a safety grounding device. When adding water, please note that it is not less than 8cm away from the upper cover. Soft water must be used. It is recommended to use distilled water to prevent the heating tube from bursting and affecting the constant temperature sensitivity. Please use it correctly according to the temperature control instrument manual and set the required temperature value.

First turn on the power, set the required temperature value on the meter according to the instructions, and when the temperature reaches the set temperature, you can turn on the cycle switch, so that all programs enter the normal working state.

Although the water circulation of the constant temperature water tank is simple to use, the regular maintenance work cannot be ignored. There are a lot of problems caused by not doing regular maintenance. The electrical power of the water cycle and the heat taken by the refrigerant from the load need to be removed from the radiator at the front vent hood. If the front vent hood is full of dust and willow cotton, etc. will hinder the dissipation of these heats, and the cooling effect will be Great discount. Generally speaking, the decrease in cooling capacity under normal use conditions is caused by poor ventilation and heat dissipation or high ambient temperature.

Constant temperature water tanks are widely used in petroleum, chemical, electronic instruments, physics, chemistry, bioengineering, medicine and health, life sciences, light industrial food, physical property testing and chemical analysis and other research departments, colleges and universities, enterprise quality inspection and production departments, The user provides a field source with controlled heat and cold, uniform temperature and constant temperature. The constant temperature test or test of the test sample or the produced product can also be used as the heat or cold source for direct heating or cooling and auxiliary heating or cooling.

The Sprayer is the device used to spray water,made of durable and recyclable plastic and fit for plastic screwed bottles. It is composed of compressed air devices and thin tubes,nozzles and other components. They are widely used in cleaning agents,disinfectant spray and gardening etc. Various shape and size as available.

Sprayer

Sprayer,Natural Extended Reach Trigger Sprayers,Plastic Spray Bottle Replacement Nozzles,Plastic Bottle Sprayer

NINGBO LONGTERM INTERNATIONAL TRADE CORP.,LIMTED , https://www.nblongterm.com