5 minutes to let you master the removal skills of doors, windows and walls
The first step in the renovation of the house is to dismantle the project. Demolition of the walls and doors and windows is naturally the most important part, but some walls cannot be removed. These walls cannot be removed! 1. The load-bearing wall cannot be dismantled. Everyone knows that the load-bearing wall bears the weight of the building and maintains the balance of the force of the entire building structure. So this taboo is absolutely impossible to touch. 2. The beams and columns in the home cannot be removed. The beam column is used to support the weight of the entire building structure. It is the core skeleton of the house. If it is arbitrarily demolished or modified, it will affect the safety of the whole building. 3. The steel bars in the wall cannot be destroyed. If the steel bars are destroyed, it will affect the bearing capacity of the building structure, leaving a safety hazard. 4. The prefabricated wall of the “brick-concrete structure†house cannot be removed, nor can it open the door and open the window. In particular, brick walls with a thickness of 24 cm or more are generally load-bearing walls. 5. The low wall at the side of the balcony cannot be removed. This wall is called the “weight-bearing wall†and acts as a stable external balcony. If it is removed, the weight of the balcony will drop. 6. It is best not to remove the door frame embedded in the concrete structure. Because such a door frame has been integrated into the concrete structure, if it is removed or modified, the safety of the structure will be destroyed. These walls can be removed! 1. The load-bearing wall cannot be removed. Can the non-bearing wall be removed? Many people have such doubts in their hearts, but some non-bearing walls also bear part of the weight of the house. Thicker and thinner, there will be subtle changes. 2. Lightweight walls and hollow slabs that only function as compartments in the home can be removed. Because the partition wall does not bear any pressure, the removal will not affect the structure of the house. What should I pay attention to when removing doors and windows? 1. The wall where the doors and windows on the outer contour of the house are located generally belong to the structural load-bearing wall. When such doors and windows are removed, the destruction and demolition cannot be carried out in a wide range, and the wall structure cannot be destroyed. Door industry vision, your friend! 2, some units are not reasonable, many door and window settings will affect the layout of the house and lighting. Such doors and windows can be removed, but the walls of the door and window holes cannot move. How to identify the load-bearing wall from the drawing? 1. From the current building, the walls with thickness of 240mm and above are basically load-bearing walls (high-rise, small high-rise). 2. As shown in the figure on the floor plan of the house, the black part represents the load-bearing, and the non-bearing wall is generally indicated by a dotted line or a thin line. This is the most secure method of identification. Kitchen Textile,Kitchen Textiles,Cotton Yarn Dyed Tea Towel,Yarn Dyed Tea Towel Jinan Huatian Leinuo Trade Corporation Ltd. , https://www.huatianleinuo.com
