Auspicious pendant handmade
1. Materials and tools: gold paper (can also be replaced by other colored paper), Chinese knot, KT blown board (can also be replaced by color cardboard), fine wood strip, thin line, double-sided tape, paper cutter, scissors. 5 Gallon Bottle Neck Sleeve Labeling Machine Bottle Neck Sleeve Labeling Machine,Automatic Labeling Machine,Bottle Neck Label Sleeve Labeling Machine,Bottle Cap Labeling Machine Zhangjiagang EBA Machinery and Equipment Co., Ltd , https://www.eba-machine.com
2. Glue the 8 fine wood strips into a wooden frame with double-sided tape. This is the basis of the hanging pieces. The same wooden frame needs to be made two.
3. Put the two wooden frames into a diamond shape, connect them with thin wires, and attach a Chinese knot to the bottom of the lower wooden frame.
4. With the side length of the wooden frame (except the protruding part) as the side length, cut four squares with KT blow molding.
5. Stick the cut KT blown sheet to the two sides of the wooden frame with double-sided tape to expose only the protruding part of the wooden strip.
6. Use the golden paper to cut the word "blessing" or other auspicious words, pay attention to the size suitable for KT blow molding board.
7. The gold characters are diamond-shaped and glued in the middle of the two wooden frames, and the auspicious pendants are completed.