Tips for fishing in different fishing conditions in winter fishing

As the saying goes: There is a law of fishing, and there is no formula; victory is in the strain and defeat in dogma. Any fishing method is limited and local. Therefore, the point of view collected by me is only for reference. I welcome everyone's valuable comments to seek mutual respect.

In winter, fishing in the shed is a helpless choice for northern fishing folks and a unique fishing method in the north. There is nowhere to go fishing in the snow and ice where the cold winds accompany, but in few days, it is not easy to get rid of itching. There is no other way to go into the shed. Today, fortunately, from the initial shed fishing, training rods, to today's winter fishing friends training, shed winter fishing has become the best place for the fishing friends "retreats in winter". The fishing friends who have been trained in the shed are more meticulous than the fishing friends who have not gone into the shed. The fishing is more elaborate and even more so. There are also people joked that the winter fishing shed wins three seasons in the spring and autumn.

Most winter fishing sheds are mainly squid, and their special environment determines the special fish conditions. Cold weather, cool water, fishy gills, and light mouth, all these difficulties in fishing have come together. It is also necessary for the friends to come up with the experience accumulated on weekdays and skilled fishing techniques. Selecting the appropriate float according to different fish is the basic starting point. In the winter fishing shed, the fish's mouth is very light, the float is not easy to choose, and the small float is more conducive to the transmission and expression of weak fish.

First, when the greenhouse has just begun

Generally, the 7-point soft-tail float is adjusted to 3 mesh plus 1 line (3 heads plus a small black square) to catch 3 or 3 mesh lines. This is the ideal choice when the fishmouth is normal. The oversight force of overlooking the float float is too large, although the favorable signal transmission in the line group is smooth, the downward small and light ports are difficult to express; the low adjustment will make the used super small float sink into the It is difficult to reset after water. If it is a weak fish mouth caused by sudden cooling, then you can adjust the 2 heads, catch a position close to 2 goals, use the float to pull up the lack of motivation to adapt to the light mouth. After the fish slowly starts to mutate, there are many movements and there are only a few fish. Then you can adjust it to 4 heads, catch 4 meshes and add 1 line or catch 4.8 heads (up to 5 points). Of course, these are all referring to the bottom of the game. Say.

Second, when the bottom fishing like fish mouth fast

The 2#-3# carbon foot thin wedge body long hard tail float is used as the main drift type. Then set the level of fishing according to the mouth of the fish. Many interfaces reduce the size of the fishing line; fewer ports increase the size of the line. The range of changes in fishing is mostly controlled between the empty hook and the unhooked. This is because the empty hooks are the number of floats that are reflected by the sum of the plumb bobs and the double hooks. No hooks are only the weight of the plumb bobs. The difference between the two items is the weight of the double hook. When the fishmouth is slow, the 1#-2# carbon shuttle-type long hard tail buoy serves as the main target. The initial order is mostly 4.5 mesh. The purpose of fishing is the same as above.

Third, when fishing float must pay attention to the conditions

The fish has indeed floated from the bottom, and there is a desire to eat food before it can be floated. It is generally not recommended to take the initiative to raise the fish. The reason is that the durability is difficult to guarantee and it is easy to confuse, unless there is already an active change in the bottom layer that has caused turbulence or the bottom fish has become frightened. Floating fish are good for fishing, but controlling fish requires great skill. Floating floats should be slightly larger than the number of floats used at the bottom to provide sufficient buoyancy.

The hard-tail floats used do not need to be adjusted too high. The distance between 3 and 5 meshes is better. After turning over, the distance from the shoulder to the mouth is more, and the fish rate is higher. Therefore, the sight of the fishing floats in the shed is preferably located in the upper middle section of the float. In floating-fishing, the difference between the number of static meshes minus the double-hook baited items is the double bait weight. The difference is the bait weight interval.

In practice, it has been found that when the floats have just crossed the fish signal that appears after sighting, the medium fish rate is also high—that is, there is a higher fish rate at the exit between the stationary fishing line and the heading. Careful fishing friends have found that it is not a bait interval? correct! In floating fishing, as long as the outlet is within the bait weight section, it is still necessary to catch the mouth. The other outlets are more selective. Therefore, the effective fishing target for floating fishing is the bait weight zone, and everyone calls it the "bait weight."

Fourth, squid fishing is aimed at sliding and light mouth pools after repeated fishing.

Carp is most concerned with techniques and most needs experience as a guarantee. Because there are often mouths that can quickly find a contingency method, and squid need to be "in a vector", we have no more time to implement the strain, and often just a moment, after this village there is no this shop. Therefore, squid requires extremely reliable response to fish information.

0#-1# carbon foot slender body 5-6 mesh soft tail float, with its fast in place, accurate and stable fish information expression capabilities, become the main fishing skimmer, slippery fishing type. The initial order can be set at 3.5 heads and the recommended head is 4 heads. No matter which type of float is selected, the color of the tail is required to be clear, the light in the greenhouse is sometimes not good, and the angle of the fishing position is not well adjusted by the angle of reading. Therefore, the number of floats is not clear. Floats will lose a lot of small moves in the fish.

In the sheds a month after the opening of the shed, the requirements of the buzz of the estuaries were even higher. There were some competitive fishing friends who began custom-made fine-tailed No. 0 reed floats in summer to prepare for the winter fishing shed. The fish situation. At this time, the float is mostly a small black box, and it is slow and powerless. The bait is completed in a shade. Moreover, due to the mouth squatting, sometimes it is necessary to use the large bluntness of the wire group in order to make the strand bend at the bottom to obtain the depth of the hook lure entrance. Only at this time can we really see the real effort of dealing with a light mouth and swiftness.

Paper Freshener

Paper Freshener use for air refreshing, it is paper with scent. can put it anywhere wanted to put . make the environment fresh . These fragrance infused shelf and paper freshener keep your clothes smelling pleasant and fresh. You'll love pulling your clothes out of the dresser each day. Perfect for freshening up musty vintage drawers.
BEAUTIFUL PACKAGING - Each set of paper freshener is delivered in a matching gift box that can be kept as a keepsake.
6, 12 or 18 SHEETS IN A SINGLE BOX - Contains 6, 12 or 18 16.5 x 22 inch non-adhesive sheets for your home's drawers and shelves.Scented Paper FreshenerScented Paper Freshener

Paper Freshener,Car Freshener Paper,Paper Air Freshener,Paper Scent Air Freshener

ZHEJIANG SHUN AN INDUSTRY & TRADE CO., LTD. , https://www.lonimaxdiffuser.com