Talking about the high simulation bronzing method
After that, the author calmed down and sorted out the bronzing process theoretically. As we all know, hot metal is in the field of hot stamping. Hot stamping is a special decorative effect formed by contacting anodized aluminum with a substrate, melting the adhesive by the action of heat and pressure, and stamping the anodized aluminum onto the surface of paper, wood, plastic or other materials. The reason why the adhesive can transfer anodized aluminum is because the outermost layer of anodized aluminum is composed of an adhesive layer. Anodized aluminum (also known as bronzing foil, commonly known as bronzing paper) is one of the most commonly used materials for modern bronzing decoration, and it shows its prominence in the bronzing business and process. If the combination of bronzing and screen printing gold and pasting gold is used to replace bronzing and used in white enamel fast food cups, what will the effect be? The author has tried boldly (practice) and found that the effect is very good. The following describes the operation methods and procedures one by one for the reference of colleagues in the industry. Select the 280 ~ 300 mesh screen, and make the required printed text into a screen according to the conventional plate making method. The graphic on the plate must be clear, the lines are full and smooth, the edges are hairless and thornless, and the font is full. Add gold oil and copper powder to a small amount of glass gold yellow ink (manufactured in Tianjin), and add an appropriate amount of DMP-130 high-efficiency additives to ensure the stability and color of the printed material (gold ink) (Note: the printing at this time The material is similar to the color of anodized aluminum), it can be used after being thoroughly mixed. The specific process is: Plate-making → Printing → Put anodized aluminum → Light pressure → Heating → Dry 8h → Remove anodized aluminum → Compensation overprint → Finished product points: (1) When printing, it is best to use a 65A90 ° angle scraper and tilt 45 ° ~ 55 ° , Manual scraping. (2) Printing on a self-made "inner cavity support type" curved printer, because the enamel fast food cup "belt handle" cannot be used for outer diameter support roll printing. (3) Print one paste one (the pre-cut anodized aluminum foil is larger than the graphic), and paste one to process one (Note: use a soft rubber strip or a sponge block to gently scrape the auxiliary pressure on the graphic part where the anodized aluminum has been attached) . (4) The interval is about 1h, then use a temperature-adjustable electric baking gun to heat one by one, heat to dry for about 6 ~ 10h, and place it for 8 ~ 10h. After the bottom of the printing material is dry, the anodized aluminum is removed, and the printed parts are displayed A clear and bright picture of anodized aluminum (Note: At this time the transfer of anodized aluminum has been achieved). This method not only meets the requirements of customers, but also improves the quality of printed products. It can also be used to decorate small batches of ceramic cups and stainless steel fast food cups (but not suitable for transparent glass cups). (5) When anodized aluminum is used for hot stamping, it is necessary to use a product with a close production date. The effect of placing it for more than half a year or more is not ideal. Anodized aluminum is preferably 18 # or a single piece of pure gold foil, preferably Japanese 2 # metal foil. Note: ①In order to prevent the incomplete transfer of the anodized aluminum and affect the appearance of the overall pattern, the pressure when rolling the auxiliary pressure after attaching the anodized aluminum should be uniform, so as to ensure the complete transfer of the anodized aluminum foil layer. ② After the graphic printing of the enamel cup, attach the anodized aluminum immediately, the time should not be too long, because the dryness of the printing material will directly affect the transfer effect of the anodized aluminum. The last process is to compensate and reinforce the overprint. Use 200-mesh silk screen and take UV-MI-20N metal varnish to cover the above enamel snack cups (cover). The area of ​​the cover is slightly larger than the graphic size. The fast-food cups covered (covered) with varnish have good adhesion after UV light solidification, and are resistant to washing and abrasion. The parts of the picture and text are gleaming, shiny and shiny, luxurious and high-end, which can be comparable to the effect of bronzing machine. Mascaras on the market are roughly divided into five types: precision mascara, waterproof mascara, thick mascara, lengthening mascara, and repair mascara. Faced with so many types, you can choose according to your own situation.
4. The mascara does not stick to the eyelids after drying, and is not afraid of being soaked by sweat, tears, and rain.
Mascara,Girls Need Waterproof Mascara,Long-Lasting Wear Mascara,Volumizing Mascara,Curling Mascara etc.
Mascara,Waterproof Mascara,Long-Lasting Wear Mascara,Volumizing Mascara,Curling Mascara Jilin Xiangqi Technology Co., Ltd , https://www.xqccosmetics.com
The precision mascara makes the eyelashes distinct, the waterproof mascara keeps you from taking off your makeup in the water, the thick lashes contain thick factors to make your eyes deep, and the fibers in the extended mascara make your eyelashes feathery. Flickering and energetic, repairing mascara can add luster to eyelashes and benefit the healthy growth of eyelashes.
The charming and crystal eyes, coupled with thick and long eyelashes, can make the entire facial makeup look vivid and delicate.
Therefore, the care and modification of eyelashes is very important. Use growth mascara to make the original dark, sparse and short eyelashes look black and long.
When choosing mascara, pay attention to the following aspects:
1. Mascara should be safe, harmless and non-irritating to the eyes. If it falls into the eyes accidentally during use, there should be no irritation.
2. Mascara should have a moderate gloss. After use, it will make the eyelashes dark and shiny, and produce better cosmetic effects.
3. The paste is even and fine, with moderate viscosity, is easier to apply, and adheres evenly, and the eyelashes will not harden or clump after use.