Efficient use of electrothermal constant temperature incubator

**Proper and Efficient Usage of the Electric Thermal Constant Temperature Incubator** To ensure safe and effective operation of the electric thermal constant temperature incubator, it is essential to follow these guidelines carefully: 1. Avoid placing the incubator in environments that contain acids or alkalis, as they can corrode internal electronic components and cause damage. 2. The incubator is not explosion-proof, so never place flammable or corrosive materials inside the chamber. This helps prevent potential hazards. 3. When the incubator is not in use for an extended period, always disconnect the power supply. Do not attempt to open or tamper with the internal mechanisms to avoid damaging the unit. 4. Keep the power cord away from metal objects and avoid exposing it to high heat or humidity. This prevents rubber insulation from aging and reduces the risk of electrical leakage. 5. Ensure that test samples are not compressed inside the chamber to maintain proper airflow and even heat distribution. Avoid placing items directly on the bottom plate near the heater. In a lab setting, adjust the top vent flap as needed to regulate internal temperature effectively. 6. Never touch the electrical components on the left side of the box with wet hands or use damp cloths to clean them. This could result in electric shock or damage to the equipment. 7. The incubator operates on 220V, 50Hz AC power. Before use, verify that the power supply matches the specified voltage and that the socket has a properly grounded connection. 8. Protect the outer surface of the incubator from scratches or damage to maintain its appearance and structural integrity. 9. If valuable cultures or strains are being stored, monitor the incubator regularly. In case of any abnormal conditions, immediately cut off the power to prevent losses. 10. Be cautious when handling the incubator at high temperatures to avoid burns. Always allow it to cool before touching the interior. 11. Avoid opening the temperature controller unless necessary, as this may cause unnecessary damage to the control system. 12. The fuse is located in the left compartment of the unit. To replace it, first turn off the power and then open the side door. 13. If the incubator is packaged and stored correctly, the manufacturer will offer free repair or replacement within one year of delivery if the unit fails due to manufacturing defects. 14. After each use, make sure to turn off the power. Keep both the interior and exterior of the incubator clean, and regularly check and replace the water in the tank if applicable. By following these instructions, you can extend the lifespan of your incubator and ensure safe, reliable performance in laboratory settings.

Compactor Pedal Trash Bin

The compactor Pedal Trash Bin is not ordinary trash unit. The trash compacting trash can is able to reduce the trash volume by 66% after compression. The trash compactor trash can could compact your waste so it doesn't need to be emptied as often. And also the free standing trash compactor features a replaceable carbon odor filter for any bad unpleasant smells. Its surface is made by fingerprint-proof 430 stainless steel. The stainless steel garbage compactor is designed with a strong steel pedal to help you pedal to open the lid and a compactor rod to help you compress the trash effortlessly.

trash compacting trash can, trash compactor trash can, free standing trash compactor, stainless steel garbage compactor

ZHEJIANG ERHUI TECHNOLOGY CO.,LTD , https://www.jahhome.com