Finished wardrobe and handmade wardrobe, which is more environmentally friendly
[ Chinese wardrobe net ] hand-made wardrobe First, from the comparison of environmental protection and harmfulness Handmade wardrobe 1. Most of the wardrobes on the woodworking site are hand-operated, and the environmental performance will vary depending on the quality of the panels selected by the owner. Plate cutting is done on site, and the work will be relatively rough. The connection of the plates is mainly nails, and the nail holes are rusted for a long time. After the wardrobe is finished, it is necessary to paint on the spot, which will inevitably lead to pollution again. 2, most of the materials are large core boards, plywood, wood board and fir boards, etc., plus secondary veneering, gluing, edge sealing is also done by hand, if not handled well, it will cause formaldehyde to exceed the standard. Finished wardrobe 1, most of the use of solid wood particle board (particle board), MDF, double-sided melamine veneer, produced by the factory assembly line, fully automatic machine edge sealing, to ensure the tightness and fineness of the wardrobe edge. 2. Many whole wardrobe manufacturers have adopted E1 grade plates. The edge banding glue is also controlled by plant-based starch glue, which has good environmental performance. Second, from the service and after-sales comparison Handmade wardrobe 1. It is connected with the wall with the closing plate, basically there is no gap, easy to move, disassemble. 2. The wardrobe made by the carpentry site is difficult to guarantee after the completion of the home improvement. Finished wardrobe 1. Design humanization and rational use of effective space. Can also be arbitrarily designed according to the needs of users, or add drawers, or reduce the partition. 2, custom wardrobes have professional staff to install free of charge, regular brand manufacturers will also have a complete set of after-sales service measures. Third, compare from the plate Handmade wardrobe 1. Woodworking can't be disassembled. Once it's done, it's fixed. 2. The woodworking site makes the taste worse, and the methanol content exceeds the standard. 3. Woodwork manual edge sealing, relatively rough. Finished wardrobe 1. It can be disassembled and assembled many times, and the disassembly and assembly is simple. The connection of the plate is a three-in-one screw, leaving no traces for disassembly and assembly. 2. The whole wardrobe site is only assembled on site, and the methanol content reaches the E1 standard. 3. The whole wardrobe is sealed with a fully automatic edge banding machine, and the edge is smooth and beautiful. Fourth, from the perspective of life In terms of long-term service life, custom-made products are better than finished products. Many materials or designs used in finished products are not in place, and the appearance is beautiful. Like some finished bookcases and shoe cabinets, door peeling or sheet deformation will occur if used for a long time. It is an experienced designer who will consider the ergonomics and mechanics carefully! The cabinets made are relatively strong. Fifth, from the price point of view As far as the current market conditions are concerned, the price of furniture purchased by oneself is higher than that of the whole wardrobe manufacturer. Some people may ask, why is it cheaper to order than to ask woodworkers? Because large brands use group procurement in procurement, coupled with factory-based batch production, the cost is greatly reduced. Professionals who do the overall wardrobe are looking for quantity rather than a single high profit, so the custom ratio is more than that. Cost-effective. Swing Turnstile Gate characteristics Mechanical Swing Turnstile Gate,Full Automatic Swing Barrier Gate,Rfid Swing Turnstile Gate,Swing Baffle Gate Guangdong Zecheng Intelligent Technology Co., Ltd , https://www.zechengsecuritys.com
1. Practicability: The swing barrier gate adopts non-contact IC or ID card, which successfully solves the problems of one card with multiple functions, confidentiality, no wear, and easy operation, which greatly improves the practical application.
2. Convenient expansion: The computer and the mechanical swing turnstile gate use 485 bus communication, so the expansion is convenient.
3. It can be used offline: the full automatic swing barrier gate can not only be used in conjunction with a computer network, but also can be used offline.
4. Reset function: After the personnel pass through the channel, the swing baffle gate will reset by delay or infrared induction.
5. Convenient counting: The RFID swing turnstile gate can be displayed on an external screen to facilitate the management of the flow of people.