Change the printing method of the barcode printer

OCOM offers two barcode printers: the OCBP-005 and the OCBP-002. The OCBP-005 is a direct thermal printer, while the OCBP-002 supports both thermal transfer and direct thermal printing. This means it has two different printing methods, allowing for greater flexibility depending on the type of label or tag you're using. If you need to switch between the two printing modes on the OCBP-002, follow these simple steps: 1. Open the "Control Panel" on your computer. 2. Navigate to "Devices and Printers." 3. Locate the OCBP-002 printer in the list, right-click on it, and select "Properties." 4. In the properties window, go to the "General" tab and click on "Preferences." 5. On the preferences page, look for the "Volume" option (this might be under a different name depending on the driver version). 6. From the settings, choose the desired printing method: either "Thermal Transfer" or "Direct Thermal." 7. Click "OK" to save your changes. Once completed, the printer will use the selected mode for all future print jobs. If you have any questions or run into issues during the process, feel free to reach out for assistance. Our support team is always here to help you get the most out of your OCOM barcode printers.

Gas Springs

furniture gas springs,gas strut for cabinet door,cabinet gas springs,gas springs for kitchen cabinet,cabinet hydraulic gas spring

Foshan Nanhai Ranming Lijiali Hardware Co., Ltd , https://www.lijialihardware.com