8 Western Digital Disk RAID Arrays Cannot Use Data Recovery Successfully
Media information: RAID disk array made of 8 disks, hard disk brand: Western Digital, single disk capacity: 2TB, single disk model: WD2000FYYZ Customer Name: Mr. Sun Fault description: The customer description does not work properly with the raid array. Data recovery process: 1. Dash raid data recovery senior engineer tested 8 member disks and found that two or two member disks had physical bad sectors. 2. The engineer will mirror all the disks after the technical processing of the bad track hard disk, and analyze the RAID combination mode of the mirrored data after completion; 3. Using Dash raid data recovery self-developed software D-recovery for RAID for virtual recombination of data; 4. The data recovery is completed after several tens of hours. Data recovery result: data recovery succeeded Advice to customers: 1, usually do a good job on the raid server, find problems and deal with them in time, and replace the faulty hard disk in time. 2. After the Raid array is abnormal, do not rebuild Raid, forced online or forced reorganization. These operations may result in permanent data loss. 3. Non-professionals should not disassemble or replace the Raid module. Improper operation may cause damage or coverage to the data in the hard disk, causing serious damage. 4, raid abnormal data is not seen when looking for a professional formal data recovery company to do data recovery, so as not to cause significant loss of data permanently lost. 5, Darth data recovery, specializing in high-hard disk, raid server, database and other data recovery. Beijing data recovery senior brand. Baby Booster Seat,Travel Booster Seat,Plastic Kids Chair,Folding Baby Chair Zhejiang Lamon Technology Inc. , https://www.babychaires.com